Filter
Top Products
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquires 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
G Series Gas
Range Match Broiler
Item: ______________________________
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
G Series Gas Range Match Broiler
Models:
G18-BRL G24-BRL G30-BRL G36-BRL G48-BRL
Specification:
Range match Broilers in available five widths: 18" (457mm), 24"
(610mm), 30" (762mm), and 36" (914mm) and 48” (1219mm) ,
designed to match G series ranges. Standard finish stainless
steel front, sides and backguard. Exclusive lift off stainless steel
grease hopper. Cast iron broiler racks with 1/2” (13mm) round
bar broad banding on one side and fine diamond branding pat-
tern on reverse in 6” (152mm) wide sections. In lieu of standard
broiler racks dual diamond pattern steel racks are available.
Simple set Hi-Lo valve sare located away from heat and protect-
ed. 15,000 BTU cast iron burners for every 6" (152mm) of broil-
ing space, natural or propane gas. Optional cabinet BRL-CAB or
open frame stand BRL-STD see specification form BRL-STD.
Standard Features:
• Stainless steel front, sides, front
rail, grease hopper and side
splash
• Stainless steel low profile back-
guard
• Counter mount or range
matched to Garland G series
ranges (when combined with
optional stand or cabinet base)
• Exclusive lift off hopper top
• Removable broiling grates in 6"
(152mm) wide sections.
• Dual-sided cast iron broiler
racks, with 1/2" (13mm) rounded
bar (broad) and diamond (fine)
patterns on opposite sides, in of
6" (152mm) wide sections.
• Heavy duty ceramic briquettes
• 4" (102mm) sanitary legs for
counter mount installations
• Simple set Hi-Lo valves
• Piezo Spark Pilot Ignition
• Gas Pressure Regulator
• 3/4" N.P.T. rear gas connection
• 15,000 BTU cast iron burners
for every 6" (152mm) of broiler
width.
• Natural or Propane gas, specify
when ordering
Optional Features:
Diamond branding rack in lieu
of standard rack
Stainless steel splatter guard
18" (457mm) to 48" (1219mm),
specify width
Nickel plated wire type holding
shelves which attach to splatter
guards, available in 18” (457mm),
24” (610 mm) & 36” (914mm)
Note: Stands and floor bases avail-
able see form BRL-STD
G24-BRL
With 4” Legs For Counter Mount