Filter
Top Products
Revised 3/96
GE Appliances
JGP326BEV—Built-In Gas Cooktop
Dimensions (in inches)
Counter Installation Dimensions (in inches)
Cooktop
3-1/4
28-1/2
19-1/2
30
21-1/4
Electrical junction
box 12" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should
not interfere
with cabinet
structure at
front
3-3/4" MIN.
clearance to
side wall
3-3/4" MIN.
clearance to
side wall
18" MIN.
to cabinet
1-3/4" to
rear wall
13" MAX.
depth
Note: Allow 5-3/4" depth
at rear for electrical
and gas connections
AGA Requirement: All gas cooktop models required 3-1/2"
free area below countertop surface to combustible material.
Requires 18" minimum from cooktop to adjacent overhead
cabinets.
Note: If installing a gas sealed burner model with a GE
Telescopic Downdraft System, consult both cooktop and
downdraft installation instructions packed with product
before installing. Cooktop gas/electric supply may need
to be re-routed to install downdraft.
Electrical Rating: 120V, 60Hz, 5A
Installation With Single Wall Oven Information:
30" Gas Cooktops are approved for use over select GE 27"
Wall Ovens. 30" and 36" Gas Cooktops are approved for use
over select 30" Wall Ovens. Refer to cooktop and wall oven
installation instructions, [Pub. No. 31-10167 (JKP18AV/17WV/
16GV/15AV/14WV/13GV/ JKS05GV); Pub. No. 31-10125
(JTP18AV/17WV/16GV/14WV/13GV)] packed with product for
current dimensional data.
Installation Information: Before installing, consult
installation instructions [Pub. No. 31-10178] packed with
product for current dimensional data.
For answers to your GE Monogram,
™
GE Profile,
™
GE, Hotpoint and RCA appliance questions, call
GE Answer Center
®
service, 800.626.2000.