Filter
Top Products
22
Save time
and money!
PROBLEM POSSIBLE CAUSE
PAN DETECTION • Improper cookware being used. Use a flat, metallic pan that is 4.0″
OR SIZING NOT or larger.
WORKING
• Pan is improperly placed. Make sure that the pan is centered on the
PROPERLY
corresponding surface unit.
TEMP LTD APPEARS • Time-Out feature activated. Allow the surface unit(s) to
IN THE DISPLAY cool for 1/2 to 1 hour before using again.
SURFACE UNIT IS • Cooktop feature activated. The cooktop has a rapid heat-up feature
GLOWING HOT and is designed to do this.
WHEN IT SHOULD
BE ON A LOW
POWER SETTING
SURFACE UNIT IS • The surface units will only be visibly red at power levels 6–H. At power
NOT GLOWING levels L–5, the red glow is not visible but the surface unit is working
RED properly. After changing a surface unit from a higher power level to
a lower power level, the red glow may disappear temporarily in order
to quickly achieve the desired temperature. If the new power setting
is greater than 5, the red glow should reappear within several minutes.
“F” AND A NUMBER • You have a function error code. Write down the “F:- - -” and
APPEAR IN THE touch the (CONTROL LOCK) pad. Disconnect power to
DISPLAY AND THE the cooktop and then reconnect. If an F-code appears again, call
COOKTOP BEEPS for service.
Before You Call For Service…
Radiant Cooktop