GE ZEU769 Cooktop User Manual


 
Glass Cooktop Cleaning
Radiant Cooktop
Burned-on
residue
WARNING: DAMAGE to your glass surface may
occur if you use scrub pads other than the pad
included with your cooktop.
1. Allow the cooktop to cool.
2. Spread a few drops of CERAMA BRYTE
®
Ceramic Cooktop Cleaner on the entire
burned residue area.
3. Using the included CERAMA BRYTE
®
Cleaning Pad for Ceramic Cooktops, rub the
residue area, applying pressure as needed.
4. If any residue remains, repeat the steps listed
above as needed.
5. For additional protection, after all residue
has been removed, polish the entire surface
with CERAMA BRYTE
®
Ceramic Cooktop
Cleaner and a paper towel.
Normal daily
use cleaning
ONLY use CERAMA BRYTE
®
Ceramic Cooktop
Cleaner on the glass cooktop. Other creams may
not be as effective.
To maintain and protect the surface of your glass
cooktop, follow these steps:
1. Before using the cooktop for the first time,
clean it with CERAMA BRYTE
®
Ceramic
Cooktop Cleaner. This helps protect the top
and makes cleanup easier.
2. Daily use of CERAMA BRYTE
®
Ceramic
Cooktop Cleaner will help keep the cooktop
looking new.
3. Shake the cleaning cream well. Apply a few
drops of CERAMA BRYTE
®
Ceramic Cooktop
Cleaner directly to the cooktop.
4. Use a paper towel or CERAMA BRYTE
®
Cleaning Pad for Ceramic Cooktops to clean
the entire cooktop surface.
5. Use a dry cloth or paper towel to remove all
cleaning residue. No need to rinse.
NOTE: It is very important that you DO NOT heat
the cooktop until it has been cleaned thoroughly.
14
Clean your cooktop after each
spill. Use CERAMA BRYTE
®
Ceramic Cooktop Cleaner.
Use a CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops or a
Scotch-Brite
®
Multi-Purpose No
Scratch blue scrub pad.
Heavy,
burned-on
residue
1. Allow the cooktop to cool.
2. Use a single-edge razor blade scraper at
approximately a 45° angle against the glass
surface and scrape the soil. It will be
necessary to apply pressure to the razor
scraper in order to remove the residue.
3. After scraping with the razor scraper, spread
a few drops of CERAMA BRYTE
®
Ceramic
Cooktop Cleaner on the entire burned residue
area. Use the CERAMA BRYTE
®
Cleaning Pad
to remove any remaining residue.
4. For additional protection, after all residue
has been removed, polish the entire surface
with CERAMA BRYTE
®
Ceramic Cooktop
Cleaner and a paper towel.
The CERAMA BRYTE
®
Ceramic Cooktop
Scraper and all recommended supplies are
available through our Parts Center. See
instructions under “To Order Parts” section
on next page.
NOTE: Do not use a dull or nicked blade.