Filter
Top Products
7
How to Assemble Your Mixer
1. Make sure Setting Control is set to
O and Mixer is unplugged.
2. Press up on Mixer Release Button
and tilt Mixer Head up.
3. Place Bowl in bowl lock and turn
clockwise until Bowl locks into place.
4. Press up on Mixer Release Button
and tilt Mixer Head down.
5. Plug Mixer into electrical outlet.
To Remove:
1. Make sure Setting Control is set to
O and Mixer is unplugged.
2. Press up on Mixer Release Button
and tilt Mixer Head up.
3. Turn Bowl counterclockwise to unlock.
To Attach the Bowl
wWARNING
Injury Hazard
Unplug mixer before inserting or removing beaters.
Unplug mixer before cleaning. Failure to do so can result in broken
bones or cuts.
1. Make sure Setting Control is set to
O and Mixer is unplugged.
2. Press up on the Mixer Release
Button and tilt the Mixer Head up.
3. Insert Attachment onto Beater Shaft
and press upward as far as possible.
4. Turn the Attachment to the right,
hooking beater over pin on shaft.
5. Press up on Mixer Release Button
and tilt the Mixer Head down.
6. Plug Mixer into electrical outlet.
To Attach the Beater, Wire Whisk, or Dough Hook
840127800 ENv01.qxd 6/29/04 9:31 AM Page 7