Harbor Freight Tools 66473 Kitchen Utensil User Manual


  Open as PDF
of 4
 
INSTRUCTIONS AND PRECAUTIONS
Visit our website at: http://www.harborfreight.com
SAVE THESE INSTRUCTIONS. READ ALL
PRECAUTIONS AND INSTRUCTIONS.
Copyright
©
2009 by Harbor Freight Tools
®
. All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams
within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ
slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
Two sizes of Cutters and Pushing Blocks are
included in this set. This tool may be wall or table
top mounted. This tool may be disassembled for
cleaning.
Cutter Frame Size: 4-5/8”W x 4-5/8”H x 11/16”T
UNPACKING
When unpacking, check to make sure that
the item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this document
as soon as possible.
IMPORTANT SAFETY
INFORMATION
1. This is a cutting device. Do not place hand
near Pushing Block and Cutter.
Do not hold vegetable or any object in place 2.
during cutting operation.
To prevent pinch injury, keep hands clear of 3.
Lever (1) and Push Rods (9) at all times.
Assemble and use according to these 4.
instructions only. Improper assembly or use
can create hazards.
Wear ANSI-approved safety goggles and 5.
heavy-duty work gloves during assembly.
Keep assembly and use area clean and well lit.6.
Keep bystanders out of the area during 7.
assembly and use.
HEAVY DUTY
FRENCH FRY
CUTTER
66473
Revised Manual 09j
next