Hobart 200-240/60/3* Dishwasher User Manual


  Open as PDF
of 8
 
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
F-40079 – AM Select Tall Dishwasher Page 1 of 8
AM SELECT TALL
DISHWASHER
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
■ .74 gallons per rack nal rinse water
■ 58 racks per hour – hot water sanitizing
■ 65 racks per hour – chemical sanitizing
■ NSF pot and pan listed for 2-, 4- & 6- minute
cycles
■ Timed wash cycles for 1, 2, 4 or 6 minutes
■ 27" door opening for 18" x 26" sheet pans or
60 quart mixing bowl
■ Solid state, integrated controls with digital status
indicators
■ Self-draining, high efciency stainless steel pump
and stainless steel impeller
■ Stainless steel drawn tank, tank shelf, chamber,
trim panels, frame and feet
■ Spring counterbalanced chamber with
polyethylene guides
■ Revolving, interchangeable upper and lower
anti-clogging wash arms
■ Revolving, interchangeable upper and lower
rinse arms
■ Slanted, self-locating, one-piece scrap screen
and basket system
■ Automatic ll
■ Door actuated start
■ Automatic drain closure
■ Vent fan control
■ External booster activation
■ Delime cycle
■ Service diagnostics
■ NAFEM Data Protocol capable
■ Straight-through or corner installation
■ Hot water or chemical sanitation
■ Sheet pan rack
VOLTAGE
❑ 208-240/60/1
❑ 208-240/60/3
❑ 480/60/3
❑ 200-240/50/3*
❑ 380-415/50/3*
*Not submitted for UL/CUL Listing
MODEL
❑ AM15T
OPTIONS AT EXTRA COST
❑ Gas heat
❑ Sense-A-Temp
™
70°F rise electric booster heater
❑ Single point electrical connection for booster
equipped machines (3 phase only)
ACCESSORIES
❑
3
⁄4" pressure regulator valve
❑ Peg rack
❑ Combination rack
❑ Sheet pan rack
❑ Splash shield for corner installations
❑ Flanged and seismic feet
❑ End of cycle audible alarm (eld activated)
❑ Delime notication (eld activated)
❑ Drain water tempering kit
Specications, Details and Dimensions on Inside and Back.
AM SELECT TALL DISHWASHER
next