Hobart LX18 Dishwasher User Manual


 
– 22 –
3. With a damp cloth, wipe the interior of the machine, the water level probes (Fig. 9), and the water
level probe under the fine strainer. DO NOT use steel wool. Wipe the exterior of the machine.
When cleaning the inside of the door, be sure to wipe the lip at the bottom of the door. Remove
any remaining debris with a mild cleanser formulated for stainless steel and a soft cloth or brush.
4. Models LX30, LX30C, LX30H, LX40C & LX40H Only: Replace the coarse and fine strainers.
Reinstall the lower wash arm by pushing it down on the shaft, then place the lower rinse arm on the
shaft and tighten the knurled knob. Spin arms to make sure they spin freely. Repeat this procedure
with the upper wash and rinse arms.
Models LX18, LX18C & LX18H Only: Replace the coarse and fine strainers. Reinstall the upper
and lower wash arms and tighten the knurled knob. Spin arms to make sure they spin freely.
5. Use a soft damp cloth or sponge and mild cleanser to clean the control keypad and display. DO
NOT use abrasive or harsh cleaners or scouring pads.
6. Leave the door ajar overnight to allow the interior to air out and dry.
CLEANING — ALL MODELS
This machine must be cleaned at least once each working day. Use only products formulated to be
safe on stainless steel.
1. Press OFF. The machine will drain. When the display is no longer lit, open the door and remove
any debris from the bottom of the tank. Do not allow food soil to accumulate on the tank bottom.
2. Models LX30, LX30C, LX30H, LX40C & LX40H Only: Remove the lower rinse arm by
unscrewing the knurled knob (Fig. 8). Remove the lower wash arm by pulling the arm off the shaft.
Remove the upper rinse and wash arms in the same manner. Remove the coarse and fine strainers
(see Figs. 5, 6). Thoroughly clean these items in a sink.
Models LX18, LX18C & LX18H Only:
Remove the upper and lower wash arms by unscrewing the
knurled knob (Fig. 8).
Remove the coarse and fine strainers (see Figs. 5, 6). Thoroughly clean these
items in a sink.
Model LX30
Fig. 8
Model LX30
Fig. 9
PL-40093-1
Knurled Knob
PL-40094-1
Water Level Probes