Filter
Top Products
PRODUCT DATA
62- 3061
® U.S. Registered Trademark
Copyright © 2001 Honeywell • All Rights Reserved
Braukmann
F74C Reverse Rinsing Filter;
MV876 Automatic-Backwash Controls
APPLICATION
‘The F74C Reverse Rinsing Water Filters, used at
point-of-entry (POE) to remove sediment and debris from
residential or commercial water systems, ensure a continuous
supply of filtered water. The fine filter prevents the ingress of
foreign bodies, such as rust particles and grains of sand. Both
horizontal and vertical installations are possible. The flow,
filtering capacity and ease of cleaning make the F74C the
ideal filter for the most demanding applications. Both
horizontal and vertical installations are possible.
The MV876 Automatic-Backwash Control is available as an
accessory. This control is fitted to the drain valve and is
programmed by the user to automatically perform the
backwash function according to the desired interval.
FEATURES
F74C
• Built-in backwash impeller provides efficient cleaning
with supply pressures as low as 22 psi.
• Robust backwash mechanism.
• No shut-off or disassembly is required for cleaning.
• During backwash, the F74C continues to supply
filtered water without interruption through a secondary
screen.
• Memory ring indicates when the next manual
backwash is due.
• Bayonet connection enables simple retrofitting of
reverse rinse actuator.
• Can be installed on vertical or horizontal piping.
MV876B
• Bayonet fitting simplifies upgrade to automatic
backwash.
• 16 field-selectable backwash intervals (from every
four minutes to once every three months) eliminate
need for external timer.
• Connections for external control on the MV876 provide
for use in automated systems and differential pressure
control.
• MV876 can be manually activated to initiate backwash.
• Battery (AA) backup to insure completion of backwash
cycle in spite of power loss.
F74C
MV876B1018
(Bayonet fitting
for F74C)
Contents
Application ........................................................................ 1
Features ........................................................................... 1
Specifications ................................................................... 2
Ordering Information ........................................................ 2
Planning the Installation ................................................... 4
Installation ........................................................................ 5
Wiring ............................................................................... 7
Operation .......................................................................... 8
F74C Replacement Parts List (See Fig. 16). .................... 10