Hotpoint RB525 Range User Manual


 
Installation of the range.
28
Prepare the Opening
Allow 1
1
2
spacing from the range to adjacent vertical walls above
cooktop surface.
Allow 30 minimum clearance between surface units and bottom of unprotected
wood or metal top cabinet, and 15minimum between countertop and adjacent
cabinet bottom.
EXCEPTION: Installation of a listed microwave oven or cooking appliance over the cooktop shall
conform to the installation instructions packed with that appliance.
If cabinet storage is installed, reduce risk by installing a range hood that projects
horizontally a min. of 5 beyond the bottom of the cabinets. Make sure the wall
covering, countertops and cabinets around the range can withstand heat
generated by the range, oven or cooktop up to 200°F.
1
Install the
outlet box
on either
side of
the C
Outlet box
Cord
Wall
Anti-Tip Bracket
(install in either rear corner)
Floor
7
7
1
2
3
1
2
7
1
2
2
1
4
5
14
5⁄
8
C of range
L
L
Hood
Wall
Not less than the width
of the range
5Min.
30
Min.
15
Min.
1
1
2
Min.
Locate the outlet box within either shaded area.
Read these instructions completely and carefully.
Operating Instructions
Installation Instructions
Safety InformationTroubleshooting TipsCustomer Service