Filter
Top Products
LARDER FRIDGE - MODELS RLA54, RLA56, RLA64, RLM54, RLM56, RLM64
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
To ensure that your fridge runs reliably and efficiently follow these steps.
Choose a location for your
fridge,away from any
heat sources and
allow adequate
ventilation - 30mm
(1
1
/4 inch) gap above.
Level the fridge by
adjusting the front feet.
This will stop rocking or
vibration and keep the
door aligned.
Your fridge is now
working.
If after 24 hours your
fridge is not operating as
you want,refer to the
Troubleshooting section.
Move the fridge into
position,using the sides
of the cabinet. Take care
to avoid damaging the
refrigerant circuit pipe
work on the rear.
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
STEP 1 STEP 2
STEP 3
STEP 6
SAFETY &
INSTALLATION CONTROLS
USEFUL ADVICE
CLEANING &
MAINTENANCE
SERVICE &
GUARANTEE
TROUBLESHOOTING
NB.The spanner is for illustration
only and is not supplied with the
fridge.
Before plugging in and
switching on,leave the
fridge in its final
location for at least 15
minutes to allow it to
settle.
STEP 5
STEP 4
Plug in and switch on.
Allow the fridge to cool
before placing food
inside.
All food in the fridge
should be covered.