Filter
Top Products
LARDER FRIDGE - MODEL RLA84, RLM84
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
To ensure that your fridge runs reliably and efficiently follow these steps.
SAFETY &
INSTALLATION CONTROLS
USEFUL ADVICE
CLEANING &
MAINTENANCE
SERVICE &
GUARANTEE
TROUBLESHOOTING
Choose a location for
your fridge,away from
any heat sources and
allow adequate
ventilation - 100mm
(4 inches) gap above.
To prevent the fridge
tilting forwards it must be
held in place with the
stability bracket supplied.
NB.This is the responsibility of
the customer.
Level the fridge by
adjusting the front feet.
This will stop rocking or
vibration and keep the
door aligned.
NB.The spanner is for illustration
only and is not supplied with the
fridge.
Plug in and switch on.
Allow the fridge to cool
before placing food
inside.
All food in the fridge
should be covered.
Move the fridge into
position,using the sides
of the cabinet. Take care
to avoid damaging the
refrigerant circuit pipe
work on the rear.
STEP 1
STEP 2
STEP 3
STEP 5
STEP 4
STEP 6
Your fridge is now
working.
If after 24 hours your
fridge is not operating as
you want,refer to the
TROUBLESHOOTING
section.
STEP 7
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
Before plugging in and
switching on,leave the
fridge in its final
location for at least 15
minutes to allow it to
settle.