Hotpoint SD97PEH Oven User Manual


 
16
Fastening the oven to the cabinet
1. Place brackets "A" up against the oven support "B".
2. Place the tabs "C" up against brackets "A". In particular,
if the cabinet side panel:
is 16 mm thick: mount the tab so that the number 16 it
features is facing you;
is 18 mm thick: mount the tab so that the part without
any wording is facing you;
is 20 mm thick: do not mount the tab.
3. Fasten the brackets and tabs on the oven cabinet side
panel using screws "D".
4. Fasten the oven to the cabinet using the screws and
plastic washers "E".
INSTALLATION
If your oven releases a lot of smoke during cooking:
Make sure you have selected the correct cooking mode for the type of dish you want to prepare and that you have
selected the right accessories and put the dish in the oven at the recommended rack height.
Check the temperature selected: is it too high for the type of cooking required.
Check the degree of soil of the oven, and whether it needs to be cleaned. Food residue encrusted onto the enamel
coating inside the oven becomes charred and creates both smoke and pungent smells.
Splashes of grease or overflows onto very hot surfaces could create smoke.
Troubleshooting
D
A
B
D
D
16
16
16
16
C
C
C
E
E