Cornelius 175 8 Valve Beverage Dispenser User Manual


 
IMPORTANT:
TO THE INSTALLER.
It is the responsibility of
the Installer to ensure that
the water supply to the
dispensing equipment is
provided with protection
against backflow by an air
gap as defined in
ANSI/ASME A112.1.2-1979;
or an approved vacuum
breaker or other such
method as proved effective
by test.
Water pipe connections
and fixtures directly
connected to a potable
water supply shall be
sized, installed, and
maintained according to
Federal, State, and Local
Codes.
Operator’s Manual
ICE/BEVERAGE DISPENSER
Model: Enduro-175 8 Valve
PRINTED IN U.S.A
IMI CORNELIUS INC; 2004
IMI CORNELIUS INC g One Cornelius Place g Anoka, MN 55303
Telephone (800) 238–3600 Facsimile (800) 535–4231
Part No. 620917901OPR
Release Date: March 1, 2004
Revision Date: N/A
Revision: A
THIS DOCUMENT CONTAINS IMPORTANT INFORMATION
This Manual must be read and understood before installing or operating this equipment