Cornelius 629085101 Beverage Dispenser User Manual


 
6
2
0
9
1
4
1
0
1
December 9, 1998
Rev A
EIMI Cornelius Inc; 1998
I
M
I
C
O
R
N
E
L
I
U
S
I
N
C
One Cornelius Place
Anoka MN 55303--6234
Telephone (800) 238--3600
Facsimile (612) 422--3246
FOR
ED2XX DUAL-MOUNTING KIT
DISPENSER MODEL KIT PART NUMBER
ED200/250 629085101
PARTS LIST
Item
No. Part No. Name Qty.
1 629080214 Insulated Lower Panel, Dual 1
2 29677 Rear Mounting Plate 1
3 620023904 Front Mounting Plate (For 6 and 8 Beverage Valve Units) 1
4 32990 Wire Connectors 4
5 50904 RTV Sealant, 3--oz Tube 2
6 620013301 Drip Tray Cover, Black 1
7 620500201 Gasket 150-In
8 620914101 Installation Instructions 1
9 70555 Screw, No. 8-32 By 1 5/16-In. long 2
10 71010 Captivating Plastic Washer, No. 8 2
11 91486 Cornelius Logo 1
1. Disconnect electric power to the Ice/Beverage Units while installing the Kit.
2. Remove lower panel assembly from both Units.
3. Relocate beverage valve keyswitch to right side of the beverage panel on one of the Units. This Unit will be
positioned on the right side of the counter.
A. Remove beverage panel access covers.
B. Locate black and red wires of the keyswitch. Cut these wires approximately 2-inches from the crimp
nut connection to the yellow wires.
C. Loosen the keyswitch mounting nut and remove the keyswitch. Using a 7/8-inch deep socket will help
access the nut.
D. Remove plastic plug from right side of the beverage panel and insert into the left side keyswitch
opening.
E. Install keyswitch into the right side of the beverage panel and tighten mounting nut.