Cornelius ED150 Ice Maker User Manual


  Open as PDF
of 4
 
ED150 “K” Style Lid Kit Installation Instructions
© 1996-2010, IMI Cornelius Inc. - 1 - Publication Number: 92111INS
INSTALLATION INSTRUCTIONS
ED150 “K” STYLE LID KITS (P/N 08008, 02390)
ON
THE FOLLWING ICE MAKER UNITS
!
WARNING:
Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the
user. Verify that all the power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or
the equipment manufacturer’s instructions.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All of the attachment screws and plates must be installed as directed in this manual.
Failure to comply could result in serious injury, death or damage to the equipment.
Perform the following procedure to install the lid kit.
Table 1. Applicable Ice Maker Models
ICEMAKER MODELS SIZE (WIDTH)
Cornelius 322/522 (includes AC/WC 322) 22”
Crystal Tips 200/300/400 22”
Ice-O-Matic GC 300/550 22”
Manitowoc 320/420 22”
Scotsman SLC 300/400 22”
Servend S2/4 22”
Table 2. Loose Shipped Parts
Item No. Part No. Name Qty.
1
52994 Cover, Gray - 08008 1
52934 Cover, Black - 02390 1
2 15506 Lid Assembly 1
3 29565 Bracket 2
4 70217 #8 Screw 6
5 50904 RTV 1
6 90221 Label 1
7 92111 Installation Instruction 1
8 620701902 Acorn Nut, 8-32 Nylon 2
9 620701901 Sealing Washer 2
10 620042928 Baffle, Ice DF/ED150 1
11 620701903 #8 Nylon Washer 2
12 620505804 Insulation Strip 1
Release Date: October 22, 2010 www.cornelius.com Revision: B
next