Cornelius P/N 629087002 Ice Maker User Manual


  Open as PDF
of 4
 
620917305
September 1999
Rev B
EIMI Cornelius Inc; 1999
IMI CORNELIUS REMCOR INC g 500 REGENCY DRIVE g GLENDALE HEIGHTS, IL 60139--2268
Telephone (800) 551--4423 Facsimile (800) 519--4423
INSTALLATION INSTRUCTIONS
FOR
ICEMAKER ADAPTER KIT (P/N 629087002) AND (P/N 629087003)
For Hoshizaki Model Series: KM/KML 200/250/400/450/500/600/630/650
Kit Part No.
Dispenser Model
629087002
629087003
DF/ED150 -- 6 Valve (22 inches wide)
DF/ED 150 -- 8 Valve (24--1/2 inches wide)
Table 1. Loose-Shipped Parts
Item
No. Part No. Name Qty.
1 620034802
620034902
Adapter Lid (629087002 Kit)
Adapter Lid (629087003 Kit )
1
2 620034808
620034901
Manual Ice Fill Cover (629087002 Kit)
Manual Ice Fill Cover (629087003 Kit)
1
3 22127 Bracket, Icemaker Mounting 2
4 620701601 Screw, Sheetmetal, No.10 by !/2--inch Long 12
5 70209 Thumbscrew, No. 8--32 by 3/8--inch Long 1
6 50904 RTV, 3--oz. Tube 1
7 620028305 Bracket, Bin Thermostat 1
8 70164 Screw, Truss--Head, No. 8--32 by 3/4--inch Long 2
9 70100 Nut, Nylok, No. 8--32 2
10 91957 Label, “Disconnect Power Before Cleaning” 1
11 620917305 Installation Instructions 1
CAUTION: Disconnect electrical power to the dispenser before proceeding with this
installation.
1. Unpack kit. Make sure all parts in Kit are present and in good condition.
2. Position the Icemaker adapter lid on the Dispenser flush with the rear of the cabinet as shown in Figure 1.
3. Seal Icemaker to top of the Dispenser adapter lid as follows:
A. Locate the Icemaker flush with the rear of the lid and centered (for 24--1/2 inches wide Dispenser) as
shown in Figure 1. Run a bead of RTV on the lid inside the perimeter of the Icemaker base outline so
that the Icemaker will set on the RTV.
next