Filter
Top Products
Flat size (W×H): 209.2 × 148 mm.
Final folded size: 104.6 × 148 mm.
INSTALLING THE WATER FILTER
1 YOU MUST SOAK your new lter in water for 15 minutes prior to
installing it in your refrigerator to remove air from the carbon block.
2 Twist the old lter a quarter-turn counter-clockwise.
3 Pull the lter straight down and discard.
4 Push the new lter up into the refrigerator until it stops.
5 Twist the lter a quarter-turn clockwise.
6 Run about two to three gallons of water through your refrigerator’s water
dispenser to remove air and loose carbon pieces. The water may be
cloudy and sputter until the air is removed.
7 Reset your “change lter” indicator (if your refrigerator has one). See
below.
RESETTING YOUR CHANGE FILTER INDICATOR
Note: These are the most common lter reset instructions. If the instructions don’t
work for your refrigerator brand, see the documentation that came with your
refrigerator.
Quick Setup Guide
|
NS-LT500P-1
Refrigerator Filter
Before using your new product, please read these instructions to prevent any damage.
Congratulations on your purchase of one of the highest performing
water lters on the market today. Insignia lters use a high-grade
coconut carbon that has 50% more micro-pores than standard carbon.
They also use fewer high-compression binders, giving you the best
water ltration possible.
PACKAGE CONTENTS
• Refrigerator lter(s) (1 pack)
• Quick Setup Guide
GENERAL INSTALLATION GUIDELINES
• It is normal for black carbon nes (particles) to appear on the outside
of your lter. This happens when the lter is jarred in shipping. It is
safe, simply wipe it o.
• Connections on our lters are larger in size to prevent leakage. This
might require more hand leverage to install.
REFRIGERATOR BRAND
LG
INSTRUCTIONS
Press and hold the reset button for three seconds.
NS-LT500P-1_15-0329_QSG_V1_EN.ai 1 4/9/2015 9:06:20 AMNS-LT500P-1_15-0329_QSG_V1_EN.ai 1 4/9/2015 9:06:20 AM
V1
FINAL
FOR PRINT