Filter
Top Products
6-3/8
"
4-3/8"
11"
6-1/8"
6-3/4"
NOTE: Max counter thickness is 1".
1/4
"
Incoming
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
2-1/2"
Dimensions
Minimum 2" required
from sink hole center
to backsplash
The original instant hot water
dispenser with easy-to-twist handle
The Next
Necessity
™
Model
H770-SS
Submittal Sheet
Job Specifications
Instant Hot Water Dispensers
Sample Specification
Printed in USA HWD297-07B-45-10
1-800-558-5700
www.insinkerator.com
• Hot Only – Dispenses near-boiling 200°F
• 35% more near-boiling water from larger
2/3-gallon stainless steel tank
• Easy to adjust temperature control
• Tool-free tank connections and dry start
protection to ease installation
• Provides 60 cups/hr of near-boiling water
• 3-Year We Come To You™ In-Home
Service Warranty*
• 120 volts, 750 watts, 6.25 amps
• Available in chrome with black handle
Instant hot water dispenser(s) shall be
InSinkErator Model H770-SS with 2/3-
gallon stainless steel tank, adjustable
temperature from 160°F to 210°F and
instant, self-closing hot valve.
Warranty:
3-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
US Pat. D532,497 (tank enclosure)
Specifications
Capacity
Electrical
Thermostat
Insulation
Valve
Shipping Weight
Recommended
Supply Pressure
Required
Hole Diameter
2/3-gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour
Snap-action,
adjustable from
160˚F to 210˚F
(factory pre-set
at 200˚F)
Meets U.L. 94HF-1
flammabiltiy
specification
Instant, self-closing
30-125 psi
Approximately
7.4 lbs.
1-1/4" – 1-1/2"
standard sink hole
120 volts A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong plug
© 2007 InSinkErator
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
InSinkErator is a division of
Emerson Electric Co.