Jenn-Air JMW9527DAQ Oven User Manual


 
MICROWAVE WALL OVEN COMBO
1. Excluding door handle.
2. 1
1/4" Diameter Conduit Access Hole. Hole must be cut as close to corner of cabinet as possible.
3. 5/8" plywood floor (must support
310 pounds).
4. Do not block air intake slots along bottom of oven.
5. Installed combo wall oven overlaps the cut out
15/16" (2.4 cm) at the top and 1/8" (.3 cm) at the bottom.
This must be taken into consideration when locating cutout if installed unit is to be centered in the cabinet.
6. These appliances have been designed in accordance with the requirements of various safety agencies and comply
with the maximum allowable wood cabinet temperatures of 194
˚
F. If these appliances are installed with cabinets
that have a lower working temperature than
194
˚
F, discoloration, delamination or melting may occur.
Electrical requirements: Provide for
120/240 or 120/208 VAC, 60 Hz.
See serial plate on front of unit for power requirements
NOTES:
Style of product may vary from picture
B
C
2
3
D
E
H
F
G
J
4
PRODUCT DIMENSIONS
INCHES CENTIMETERS
MODEL SKUs
JMW9527DAB
JMW
9527DAQ
JMW
9527DAS
JMW
9527DAW
Important: Because of continuing product improvements, Jenn-Air
®
reserves the right to change specifications without notice. Dimensional specifications are provided for
planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.