Filter
Top Products
To set oven on Bake or Convect Bake or Convect Roast
1. Place oven racks on proper rack positions° (See p. 21.)
2, Touch Bake Pad or Conveet Bake Pad or Convset Roast Pad,
Indicator Words BAKE or CONV BAKE or CONV ROAST wi|l flash and three
dashes will be shown.
Note: If more than fifteen seconds elapse between touching a pad and touching a
number pad, Display will return to previous Display.
3. Touch the appropriate number pads for desired oven temperature,
Allowable temperature range is 100°to 550°F. After four seconds the oven wilt begin
to preheat. The Indicator Words ON, PREHEAT, and either BAKE or CONV BAKE
or CONV ROAST will appear in the Display. The temperature shown will be 100_
or the oven temperature whichever is higher.
Example: If at 10 o'clockyou set the oven for 3500 for convect baking, after four
seconds the Display wilt show:
j o;oo
During the preheat, the Display will show a rise in 5° increments until programmed
temperature is reached. When the oven is preheated, the oven will chime, the ON
and PREHEAT Indicator Words will go off, and programmed overt temperature will
be displayed,
Note: Oven will preheat for approximately 7 to 11 minutes.
Important: Whenever ON appears in the D_splay, the oven is heating.
temperature set during preheat: Touch the appropriate Bake or
Convect Bake Pad or Convect Roast Pad, Temperature will be briefly displayed,
then will automatically return to on-going program.
_temperature set: Touch appropriate Bake Pad or Convect Bake Pad
or Convect Roast Pad and the appropriate number pads for the new desired
temperature.
Note: Ifyou are _owedng the temperature below the current oven temperature, the
word PREHEAT and ON willappear briefly inthe Display and the preheat chime will
sound. Then, the Display will show programmed temperature and indicator word
BAKE or CONV BAKE or CONV ROAST only.
4. Touch Cancel Off Pad to turn oven off at end of baking. The oven wilt continue
operating until the Cancel Off Pad is touched,
20