Filter
Top Products
5 USK FT 14417 - 080522
DISASSEMBLING THE DEEP FAT FRYER
• Remove the control panel from the appliance. To do this, gently
pull the control panel upwards until it is released.
• Take the interior bowl with your two hands and pull it up gently.
ASSEMBLING THE DEEP FAT FRYER
• Stand the appliance on a dry horizontal surface.
• Place the bowl back in the housing and push it downwards.
• Replace the control panel and the accessories. To replace the
control panel, firmly slide the control panel downward into the
location grooves on the back of the housing until it is locked.
• NOTE: The appliance will only operate when the control panel is
correctly fitted to the outer jacket.
• Press the end of the basket's handle together, insert its pins into
the holes foreseen on the basket and unfold the handle of the
basket until it is locked to allow rising the basket easily.
• Put the remaining power cord length in the cord storage in the
back of the appliance.
FIRST USE
• When using the appliance for the first time, pour the required
amount of oil in the bowl, making sure that the level is between
the MIN and MAX marks indicated inside the bowl.
• We recommend that you use a liquid oil that is suitable for deep
fat frying. Check the label on the bottle. If you wish to use a solid
fat, cut the fat in small pieces. Plug in the appliance, put the
thermostat on the minimum position and add the fat pieces
slowly. When the fat has melted, set the thermostat to the desired
temperature. WARNING: FAILURE TO OBSERVE THIS WILL DAMAGE
YOUR DEEP FAT FRYER.