Filter
Top Products
10
Cleaning After Use
1. Always ensure that the speed
selector switch is in the ‘OFF’ (0)
position and that the power is
turned off at the power outlet.
Then remove the plug from the
power outlet.
2. To remove the mixer motor for
cleaning press the mixer release
button and lift the mixer motor
from the support arm.
3. Holding the motor unit, press the
eject button and remove the
beaters.
4. Use a rubber spatula to scrape
remaining mixture from the
beaters/dough hooks.
5. Wash the stainless steel mixing
bowl beaters and dough hooks
in warm soapy water with a soft
cloth. Rinse and dry thoroughly.
The mixing bowl may be washed
in the dishwasher.
NOTE: Do not use abrasive
scouring pads or cleaners when
cleaning the beaters as these
may scratch the beater surface.
NOTE: Do not allow the
beaters to soak in water for an
extended period of time, as this
may lead to the metal finish
being damaged.
Care, Cleaning and Storage
6. Wipe the mixer body and mixer
stand with a damp cloth and dry.
Polish with a soft dry cloth.
7. Wipe any excess food particles
from the power cord.
NOTE: Do not wash or soak the
mixer stand in water or any other
liquid. Clean with a damp cloth
and dry. Do not allow water
or any liquid to enter the gear
system as damage may result.
WARNING: Never
immerse the mixer, power
cord or plug in water or
any other liquid.