Filter
Top Products
DOOR REMOVAL
If door must be removed:
,, Unplug the unit
,, Gently lay freezer on its back, on a rug or blanket.
,, Remove two base screws and base panel. Remove wire from
clips on bottom of cabinet, if required.
,, Unplug connector, if required, by holding the cabinet connector
in place and pulling the door connector out.
,, Remove the bottom hinge screws.
,, Remove the plastic top hinge cover.
,, Remove the screws from the top hinge.
,, Remove the top hinge from the cabinet.
,, Remove the door and bottom hinge from the cabinet.
,, To replace door, reverse the above procedures and securely
tighten all screws to prevent hinge slippage.
Base Panel Screws -
Base
COOL DOWN PERIOD
For safe food storage, allow four (4) hours for freezer to cool
down completely. The freezer will run continuously for the first
several hours.
ELECTRONIC TEMPERATURE CONTROL
The electronic tern )erature control is located inside the freezer.
Temperature is factory preset to provide satisfactory food storage
temperatures. However, the temperature control is adjustable to
provide a range of temperatures for your personal satisfaction.
To adjust the temperature setting, move the UP (_) button for
warmer temperature and DOWN (0) button for colder
temperature on the control panel. Allow several hours for the
temperature to stabilize between adjustments.
Hinge Screws
FREEZERTEMP
Door Connector
Cabinet Connector
iCE MAKER INSTALLATION
If your freezer has an automatic ice maker, please refer to the
insert in the bond pack that came with your freezer
(CONNECTING iCE MAKER TO WATER SUPPLY) to correctly
hook-up your ice maker.
INTERIOR LIGHTING
7 is coUdest
0 is off
The light comes on automatically when the door is opened. The
light bulb assembly is located
on the back of the freezer
control box. To replace the light
bulb, turn the temperature
control to "OFF" and unplug the
electrical cord. Replace the old
bulb with a bulb of the same
type and wattage.
SPILL PROOF SLIDE-OUT GLASS SHELVING
Multi-position adjustable slide out glass shelves can be moved
to any position for larger or smaller packages. The shipping
spacers that stabilize the shelves for shipping may be removed
and discarded. ,