Please carefully read and save these instructions
This Use & Care Manual contains general operating instructionsfor your appliance and feature information for several
models.Your product may not have all the described features. The graphics shown are representative. The graphics on
your appliance may not look exactly like those shown. Common sense and caution must be practiced when installing,
operating and maintaining any appliance.
Product Record
In this space below, record the date of purchase, model and serial number of your product. You will find the model and
serial number printed on the serial plate. This serial plate is located under the cooktop. See bottom of this page for the
serial plate location.
Model No. 790.
Serial No.
Date of purchase
Save these instructions and your sales receipt for future reference.
Serial Plate Location
You will find the model and serial number printed on the serial
plate. The serial plate is located under the cooktop.
Please see the illustration for exact location. Remember to
record the serial number for future reference (See Product
Record above).
Serial plate is
located under the
burner box.
Grounding Instructions
For personal safety, the cooktop must be properly grounded. For
maximum safety, the power cord must be plugged into an electrical outlet
that is correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension
cord. If a 2-prong wall receptacle is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with a
properly grounded 3-prong wall receptacle installed by a qualified
electrician.
See the INSTALLATION INSTRUCTIONS packaged with this cooktop
for complete installation and grounding instructions.
This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and should be plugged
directly into a properly grounded receptacle. DO NOT cut or remove
the grounding prong from this plug.
Grounding type Do not, under any
wall receptacle circumstances,
cut, remove, or
bypass the
grounding prong.
Power supply cord with
3-prong grounding plug
Avoid fire hazard or electrical
shock. DO NOT use an adapter plug, an extension
cord, or remove grounding prong from electrical
power cord. Failure to follow this warning can
cause serious injury, fire or death.
Liquefied Petroleum (Propane) Gas Conversion
(Only models 790-3244 & 790-3245 can be converted)
Only models 790-3244 & 790-3245 can be used with Natural Gas and
Propane Gas. They are shipped from the factory for use with natural
gas.
If you wish to convert your cooktop for use with propane gas, use
the instructions in the envelope attached, marked "FOR LP/
PROPANE GAS CONVERSION".
Only a qualified service agent should perform the L. P. conversion.
Contact the local gas provider for conversion. An L. P. Conversion
Kit is supplied with this range and is located on the main back of the
range. The kit contains installation instructions which must be read
before and followed carefully when installing the kit.
Severe electrical shock, or damage to
the cooktop, may occur ifthe cooktop is not converted
by a qualified installer or electrician.
To avoid serious injury, any
additions, changes or conversions required in order
for this appliance to satisfactorily meet the
application needs must be made by a qualified
service agent.
5