Filter
Top Products
6
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com
Typical Installations
NOTE: Be sure to allow a minimum space of 2” under the
filter for removing the sump (to change the cartridge).
WATER
IN
WATER
OUT
Nut
Figure 6
Optional
Shutoff
Valve
Brass
Ferrule
Compression
Adaptor
INLET
1” NPT
MATERIALS & TOOLS NEEDED
2 compression adaptors, 1” NPT x com-
pression end to fit existing copper pipe
Teflon tape
Tubing cutter
Sandpaper or emery cloth
2 wrenches, either open end or adjustable
jaw, sized to fit compression adaptors
A. INSTALLATION ON COPPER PLUMBING USING COMPRESSION FITTINGS
Figure 3
B. SOLDERED COPPER INSTALLATION
C. THREADED INSTALLATION
D. UNDERSINK INSTALLATION
(Filtering Water to One Faucet)
Figure 4
Figure 5
IN OUT
IN OUT
IN OUT
Optional
Shutoff
Valve (2)
Optional
Shutoff
Valve (2)
WATER
IN
WATER
OUT
1” Copper
Pipe, as
required
Adaptor, 1” NPT
x Sweat (Apply
4 wraps of
Teflon Tape)
WATER
IN
WATER
OUT
1”
Nipple
(2)
1” Hex
Nipple
(2)
Union
Fitting
(2)
NOTE: To change the filter
cartridge, you must
turn off the water.
A nearby shutoff
valve is convenient.
Most sinks already
have shutoff valves
on the supply pipes.
COLD
Shutoff Valve
SINK
NOTE: Be sure to allow
a minimum
space of 2” under
the filter for
removing the
sump (to change
the cartridge).
See Note in Figure 3
See Note in Figure 3
Apply 4 wraps of
Teflon Tape
Optional
Shutoff Valve