Kenmore 790.3101 Cooktop User Manual


 
Grounding instructions
For personal safety, the cooktop must be properly grounded. For
maximum safety, the power cord must be plugged into an electrical
outlet that is correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension
cord. If a 2-prong wall receptacle is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with a
properly grounded 3-prong wall receptacle installed by a qualified
electrician.
See the INSTALLATION INSTRUCTIONS packaged with this cooktop
for complete installation and grounding instructions.
This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and should be plugged
directly into a properly grounded receptacle. DO NOT cut or remove
the grounding prong from this plug.
Grounding type
wall receptacle
Do not, under any
circumstances,
cut, remove, or
bypass the
grounding prong.
Power supply cord with
3-prong grounding plug
Avoid fire hazard or electrical
shock. DO NOT use an adapter plug, an extension
cord, or remove grounding prong from electrical
power cord. Failure to follow this warning can cause
serious injury, fire or death.
Liquefied Petroleum (Propane) Gas Conversion
This appliance can be used with Natural Gas or Propane (L.P.) Gas.
It is shipped from the factory for use with Natural Gas.
If you wish to covert the appliance to LP Gas, use the supplied LP
Gas conversion kit and instructions, contained in an envelope
marked FOR LP/PROPANE GAS CONVERSION. The conversion
must be performed by a Sears or other qualified LP service
dealer following the supplied instructions.
To avoid serious injury or death, any
additions, changes or conversions required for this
appliance to operate with either LP or Natural Gas
must be made by a Sears or other qualified LP
service dealer.