Filter
Top Products
Setting Oven Controls
• Silent Control Operation
• Saving & Recalling Recipe Settings
Setting Silent Control Operation
The DELAY START @ and FLEX CLEAN @ pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. Ifdesired the control
can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS PRESS DISPLAY
To change control from normal sound operation to
silent control operation:
1. To tell if your range is set for normal or silent operation press
and hold _SDTE_AR_'_TY for 7 seconds. "0:00" will appear and "DELAY"
V
will flash in the display (Fig. 1).
2. Press _CFLL_AXN_to switch between normal sound operation and
V
silent operation mode. The display will show either ":SP" (Fig. 2)
or ":--" (Fig. 3).
If ":SP" appears (Fig. 2), the control will operate with normal
sounds and beeps, tf ":- -" appears (Fig.3), the control is in the
silent operation mode.
A
Press _ to accept the change or press _ to reject the
change.
for 7seconds
@
Fig. 1
Fig. 2
Fig. 3
Saving and Recalling Recipe Settings
The Recipe Recall feature may be used to record and recall your favorite recipe settings. This feature may store 1 setting
for each of the basic cooking pads. The pads that a recipe may be stored with are BAKE _, CONV BAKE @,
MEATS @, CAKES _ & BREADS _. To store a recipe, start your recipe with one ofthe pads listed. When
using the (_ pad to start cooking, press and hold the START pad for 6 seconds. When the 2nd beep sounds, release
the START pad. The 2nd beep indicates the the recipe has been stored correctly. To store a new recipe over the old stored
recipe, set up the recipe as you normally would and save by holding the START pad until the 2nd beeps sounds. The
recipe will be saved and the oven will start with the new recipe.
NOTES:
1. Pressing the (_ pad when entering cooking temperatures and times will start the oven. If you wish to store the
recipes but not start the oven press _ after pressing the (_ pad.
2. Once a recipe has been stored with any of the 5 basic cooking pads listed above, the recipe information will appear in
the display when pressing the pad in the future.
3. Should a recipe be needed that is different from the currently stored recipe, but do not wish to loose the old stored
recipe, override with the new time and temperature settings and press (do not hold) the (_ pad once.
20