Filter
Top Products
Change Freezer Compartment Light Bulb
1. Unplug refrigerator power cord form outlet.
2. Remove the screw using a Phillips screwdriver.
3. Grasp the light cover, pull the cover downward.
4. Make sure the bulb is cool to the touch.
Rotate the bulb counterclockwise to remove.
5. Replace with a new 60-watt appliance bulb.
6. Insert tabs on back of cover into slots in freezer
ceiling. Push cover up to snap front into place.
7. Tighten the screw using a Phillips screwdriver.
WHEN YOU GO ON VACATION
If you choose to leave the refrigerator on while
you are away, follow these steps to prepare your
refrigerator before you leave.
1. Use up any perishables and freeze other items.
2. Turn off icemaker and empty the ice bin.
If you choose to turn the refrigerator off before
you leave, follow these steps.
1. Remove all food from the refrigerator.
2. Clean refrigerator, wipe it and dry well.
3. Tape rubber or wood blocks to the tops of both
doors to prop them open far enough for air to get
in. This stops odor and mold from building up.
• , CAUTION: DO NOT place fingers inside of cover.
Lamp may be hot.
• When you are finished, reconnect the refrigerator to
the electrical source and reset the controls.
POWER INTERRUPTIONS
1. If the power will be out for 24 hours or less, keep
all refrigerator doors closed to help foods stay
cold and frozen.
2. If the power will be out for more than 24 hours,
remove all frozen food and store it in a frozen food
locker.
WHEN YOU MOVE
When you are moving your refrigerator to a new
home, follow these steps to prepare it for the move.
1. Remove all food from the refrigerator and pack all
frozen food in dry ice.
2. Unplug the refrigerator.
3. Clean, wipe and dry thoroughly.
4. Take out all removable parts, wrap them well and
tape them together so they do not shift and rattle
during the move. Refer to sections in Using your
Refrigerator for removable instructions.
5. Depending on the model, raise the front of the
refrigerator so it rolls more easily OR screw in the
leveling legs all the way so they do not scrape the
floor. See the Door Closing section.
6. Tape the doors shut and tape the power cord to
the refrigerator cabinet.
When you get to your new home, put everything
back and refer to the Installing Your Refrigerator
section for preparation instructions.
33