Filter
Top Products
Installation Instructions
VCVR Series vented enclosures combine KICKER’s CompVR subwoofer with
computer designed and human-fine-tuned enclosures. They offer a level of
bass performance never before thought possible from a commercially avail-
able enclosure. The VCVR Series enclosures are covered in carpet for protec-
tion and pre-loaded with a CompVR woofer.
The location and orientation of your VC enclosure will affect the quality
and quantity of the bass. Designed for use in SUVs and sedan type vehicles,
the enclosure offers you several mounting options.
The first rule you must remember is that the vent opening in these enclo-
sures cannot be obstructed. Around the tuning frequency of the vent a
substantial amount of bass is created. Therefore we recommend you leave
at least four inches of clear space around the vent.
If the enclosure is to be mounted all the way in the back of the vehicle, it
works best to point the woofer toward the front of the vehicle. Conversely,
if the enclosure is going to be mounted closer to the back seat, pointing the
woofer toward the rear of the vehicle will give you the best results. These
guidelines are good for when the enclosure is mounted cross-ways in the
vehicle as shown below.
VCVR10 / VCVR12
Vented Enclosure Systems
Front Mounting, woofer faces the back of the car!
Rear Mounting, woofer faces the front of the car!
AT LEAST
4"
AT LEAST 4"
FRONT
Congratulations! You have just purchased one of the most flexible subwoofers
yet from KICKER. Your CompVR sub is designed to give you great bass perform-
ance in a wide variety of applications. These installations instructions will help you
get the most out of your new KICKER sub. Thanks for buying KICKER. Enjoy!