Kirkland Signature SUD6000 Dishwasher User Manual


 
6
START-UP GUIDE
Before using your dishwasher, remove all hang tags,
temporary labels, and packaging materials. Read this
entire Use and Care Guide. You will find important safety
information and useful operating tips.
Using Your New Dishwasher
1. Scrape large food soil and hard items (toothpicks or
bones) from dishes.
2. Properly load the dishwasher. (See “Loading Your
Dishwasher.”) Make sure nothing prevents the spray
arm(s) from spinning freely.
3. Add detergent and check the rinse aid dispenser. Add
rinse aid if needed. (See “Using Your Dishwasher.”)
4. Push door firmly closed. The door latches
automatically. Run hot water at the sink nearest your
dishwasher until the water is hot. (See “Dishwasher
Efficiency Tips.”) Turn off water.
5. Select the desired cycle and options. (See “Using Your
Dishwasher.”)
The dishwasher starts filling when you press a cycle. You
can select options as the machine is filling.
Stopping Your Dishwasher
You can stop your dishwasher anytime during a cycle.
1. Open the door slightly.
2. Wait for the spraying action to stop. Then open the
door all the way, if needed.
Close the door to continue the cycle.
OR
Press CANCEL/DRAIN. A 2 minute drain starts.