Filter
Top Products
8
Adjustable 3-position top rack
You can raise or lower the top rack to fit tall items in either
the top or bottom rack. Two adjusters are located on each
side of the top rack. Each adjuster has 3 preset positions.
The high and low positions are marked on the adjuster.
To adjust the top rack
1. Hold the top rack with one hand near the adjuster.
2. With the other hand, pull out the top of the adjuster.
3. Raise or lower the rack to one of the preset positions.
4. Release the adjuster.
Repeat the steps for the remaining adjusters as needed.
The 4 adjusters can be raised or lowered separately or
together. The top rack does not have to be level.
Cup shelf
Fold down the extra shelf on the right side of the top rack
to hold additional cups, or long items such as utensils and
spatulas.
Light Items Clips
You can hold lightweight plastic items like cups, lids, or
bowls in place during washing with the Light Items clips.
You can move a clip anywhere in the rack.
To move a clip
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Small items basket
This basket fits in the top rack. Use it to hold small items
that could otherwise “fly” around inside the dishwasher
during a cycle.
Loading the Bottom Rack
The bottom rack is designed for plates, pans, casseroles,
and utensils. Items with cooked-on or dried-on food
should be loaded with soiled surfaces facing inward to the
spray. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary
from the drawings shown.
Do not cover spray tower. See arrow.
Mixed load
■ Do not load glasses, cups, or plastic items in the
bottom rack. Load small items in the bottom rack only
if they are secured in place.