KitchenAid KBDS250X Garbage Disposal User Manual


 
A
B*
C*
E
D
dishwasher drain
connection
B* – Distance from bottom of sink to center line
of disposer outlet. Add 1/2 inch when
stainless steel sink is used.
C* – Length of waste line pipe from center line of
disposer outlet to end of waste line pipe.
IMPORTANT: Plumb waste line to prevent
standing water in disposer motor housing.
Drawing shown
will vary with
model.
Food-Waste Disposer
OVERALL DIMENSIONS
KBDS250X
KCDC250X
KCDI250X
KCDS250X
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. 4211562
01-08-04
PRODUCT MODEL NUMBER
Electrical: A 120-volt, 60-Hz, AC-only 15- or
20-amp fused, grounded electrical supply is
required. It is recommended that a separate circuit
serving only your food-waste disposer be
provided. Time-delay fuse of circuit breaker is
recommended.
®
Model No. A B* C* D E
KBDS250X 16-1/16" 9-7/16" 4" 10-1/16" 7-1/8"
KCDC250X 12-3/8" 6/7/8" 4" 7-3/4" 5-3/8"
KCDI250X 13-7/16" 6-13/16" 4" 9-1/16" 5-3/4"
KCDS250X 13-11/16" 6-13/16" 4" 10-1/16" 7-1/8"
For continuous feed models, install a 15- or 20-amp
wall switch above the countertop and junction box
inside cabinet as shown. (Switch and electrical
wiriing can be obtained locally.) Position switch in a
convienient location. Connect switch to junction box.
junction
box
wall
switch