KitchenAid KRFC704FPS Refrigerator User Manual


 
7
ENERGY SAVER MODE AND NORMAL
OPERATING SOUNDS
Your new French Door Bottom-Mount refrigerator has been
designed to optimize energy efciency and better regulate
temperatures to match cooling demand.
You may notice that it operates differently from your previously
owned refrigerator.
It is normal for the high-efciency compressor to run for extended
periods of time at varying speeds in order to consume only the
energy necessary for optimum efciency.
In addition, during various stages of the cooling cycle, you may
hear normal operating sounds that are unfamiliar to you.
Energy Saver Mode
Turns off the anti-sweat heaters to save the customer power.
When the icon is bright, the function is activated (heaters OFF);
icon off means that it is inactive (heaters ON). The user can toggle
the feature by pressing the button. If the user lives in a climate
with high humidity, Energy Saver mode is not recommended.
DOOR ALIGNMENT
Align Refrigerator Doors
If doors are uneven:
Ensure the refrigerator is level.
Keeping both refrigerator doors closed, pull out the freezer
drawer. Locate the bottom hinge pin of the right-hand
refrigerator door. The alignment screw is inside the bottom
hinge pin.
Insert the short end of the ¹⁄
8
" hex key wrench (packed with the
Door Handle Installation Instructions) into the bottom hinge pin
until it is fully engaged in the alignment screw.
To raise the refrigerator door, turn the hex key to the right.
To lower the door, turn the hex key to the left.
Continue to turn the alignment screw until the tops of the
doors are aligned.
A
B
Shelf Height Adjustment
Shelf height can be adjusted by changing the adjustable shelf
mounts between their vertical and horizontal positions.
Carefully lift the shelf off the shelf mounts and turn the ipper
to the desired orientation.
Repeat for remaining shelf mounts.
Ensure the shelf is properly seated on the shelf mounts.
A. Bottom hinge pin
B. ¹⁄
8
" hex key wrench