KitchenAid KRFF507EBL Refrigerator User Manual


 
REFRIGERATOR USE
21
NOTE: REPLACE FILTER will remain illuminated if a filter is
not installed or installed incorrectly.
Additional Features
Sabbath Mode
Sabbath Mode is designed for those whose religious
observances require turning off the lights and dispensers.
In Sabbath Mode, the temperature set points remain unchanged,
but the interior and dispenser lights turn off. Sounds, alarms, and
the dispenser paddels are disabled.
To turn on Sabbath Mode, press and hold LIGHT and
OPTIONS at the same time for 3 seconds. When the feature
turns on, “Sabbath Mode” will appear on the dispenser
display.
To turn off Sabbath Mode, press and hold LIGHT and
OPTIONS at the same time for 3 seconds. The screen will
display the settings as they were before Sabbath Mode was
turned on. However, the Max Cool and Max Ice features, will
remain off until they are selected again.
NOTES:
Turning “Cooling Off” will cancel Sabbath Mode
If a power outage occurs while in Sabbath Mode, Power
Outage will not be indicated on the display no matter how
long the power was out.
Vacation Mode
In Vacation Mode, the freezer will defrost less often to conserve
energy.
To turn on Vacation Mode, press and hold TEMPERATURE
and OPTIONS at the same time for 3 seconds. When the
feature turns on, “VAC” will appear on the dispenser display.
To turn off Vacation Mode, press and hold TEMPERATURE
and OPTIONS at the same time, again, for 3 seconds. The
screen will display the settings as they were before Vacation
Mode was turned on.
NOTES:
During the first hour after Vacation Mode is turned on,
opening and closing the refrigerator door will not affect the
setting. After 1 hour has passed, opening and closing the
refrigerator door will turn off Vacation Mode.
While in Vacation Mode, if Max Ice, Max Cool or Sabbath
Mode is turned on, it will cancel Vacation Mode.
Power Outage Indicator
The power outage indicator lets you know if the power supply to
the refrigerator has been cut off and the freezer temperature has
risen to 18°F (-8°C) or higher.
When power has been restored, “PO” repeatedly flashes on the
control panel display. All other control and dispenser functions
are disabled and “PO” will continue to blink until you
acknowledge the power outage.
Press the MEASURED FILL button to confirm. The Power
Outage “PO” will disappear, and the control panel will return
to the Normal screen.
Door Ajar Alarm
The Door Ajar Alarm feature sounds an alarm when the
refrigerator door(s) or freezer drawer is open for 5 minutes and
cooling is turned on. The alarm will repeat every 2 minutes. Close
all doors and drawer to turn it off. The feature then resets and will
reactivate when either door is left open again for 5 minutes.
NOTE: To mute the audible alarm while
keeping the doors open,
such as while cleaning the inside of the refrigerator, press a
ny
button on the control panel. The alarm sound will be temporarily
turned off, but the Door Ajar icon will still be displayed on the
dispenser control panel.
Disabling Sounds
To turn off control and dispenser sounds, press and hold ICE
MODE and MEASURED FILL at the same time for 3 seconds.
All normal operating tones are disabled. Only alert tones will
be audible.
To turn all sounds back on, press and hold ICE and
MEASURED FILL at the same time for 3 seconds again.
Showroom Mode
This mode is used only when the refrigerator is on display in a
retail store. If you unintentionally turn on Showroom mode, the
words SHOWROOM MODE will light up on the display. Exit
Showroom mode by pressing and holding LIGHT and LOCK at
the same time for 3 seconds.
Max Ice
The Max Ice feature assists with temporary periods of heavy ice
use by increasing ice production.
To turn on the Max Ice feature, press the OPTIONS button to
enter Options mode, then press the TEMPERATURE button,
under Max Ice, to activate the feature. When the feature is on,
the Max Ice icon will appear on the dispenser display screen.
The Max Ice feature will remain on for 24 hours unless
manually turned off.
To manually turn off the Max Ice feature, press the OPTIONS
button to enter Options mode (unless you are already in
Options mode), then press TEMPERATURE again. When the
feature has been turned off, the Max Ice icon will disappear
from the dispenser display.
Water Filter Status
Press FILTER STATUS to display the percentage of use remaining
in the water filter (from 100% to 0%
).
ALSO
The water filter status lights will let you know when to change
your water filter.
ORDER FILTER (Yellow) - Order a replacement water filter.
REPLACE FILTER (Red) - Replace the water filter. Replacing
the disposable water filter will automatically reset the water
filter status tracking feature. See “Water Filtration System.”