Filter
Top Products
Without Trim Kit
Compactor
PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
CABINET OPENING DIMENSIONS
CUSTOM PANELS
CLEARANCE DIMENSIONS
KFCK03IT
KFCP02IR
KUCK03IT
KUCP02IR
KUCS02CR
KUCS03CT
Electrical: 115-volt, 60-Hz, AC-only, 15- or
20-amp grounded circuit is required. A separate
circuit is recommended.
18" min.
(45.7 cm)
24" min.
(61 cm)
A
15 min.
(38.7 cm)
34 " min.
(87 cm)
3" min.
(7.6 cm)
"
A
B
34
1
⁄8"
(86.7 cm)
24"
(61 cm)
15"
(38.1 cm)
29
³⁄₈"
(
74.6 cm
)
15"
(
38.1 cm
)
25"
(
63.5 cm
)
15"
(
38.1 cm
)
1. Grounded electrical outlet
must be a minimum of 3"
(7.6 cm) away from
surrounding cabinets or
nearby walls as shown. It
can be placed either to the
left or the right side of the
product.
Panel should be 1/2"
(13 mm) min. thickness
1. Leave 6" (15.2 cm) of clearance
space to the right side of the
compactor in order to remove the
compactor bags.
2. Leave 23" (58.4 cm) of clearance in
front of the compactor in order to
fully open or remove the compactor
drawer.
Models with handles Models without handles
Panel should be 1/2" to 5/8"
(13 to 16 mm) thick. NOTE: A
thicker panel may need rounded
front corners and a cutout for
access to the handle.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. 9872216
04-27-07
®