Filter
Top Products
®
PRODUCT MODEL SERIES OVERALL DIMENSIONS
CABINET DIMENSIONS
KUDD01SS
Electrical: 120-volt, 60 Hz, AC-only, 15 or
20 amp fused electrical supply is required. A
time-delay fuse or circuit breaker and separate
circuit is recommended.
Water: A hot water line with 4.3-145 psi
(30-1000 kPa) water pressure. Water temperature
must be minimum 120°F (49°C) at dishwasher. An
easily accessible valve with ³⁄₈” compression
fitting must be installed in the hot water supply
line.
Because Whirlpool Corporation policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. 8573714
02-03-06
Single Drawer Dishwasher
23⁷⁄₁₆"
(59.5 cm)
22⁷⁄₁₆" *
(57 cm)
16³⁄₃₂"
side
attaching
tabs
20
¹⁵⁄₃₂"
(52 cm)
drawer open
4"
(10 cm)
moisture protection
tape
support surface must
be solid and level
Utility hole:
1
¹⁄₂" (3.8 cm) dia.
hole, either side –
immediately adjacent
to corner.
22⁷⁄₈" (58.0 cm)
3
¹³⁄₁₆
"
(9.7 cm)
19
⁷⁄₈
"
(50.5 cm)
2
⁵⁄₈
"
(6.7 cm)
23⁵⁄₈"* (60.0 cm)
16 ⁷⁄₃₂"
(41.2 cm)
These marks indicate the mounting tab screw locations.
Minimum thickness of cabinet/cavity sides – ⁵⁄₈" (1.6 cm)
* If custom wood panels are to be used, the product depth is specified
with an ¹¹⁄₁₆" (18 mm) door panel thickness.
NOTE: Product shown with front panels for dimension purposes.
Install the dishwasher in a cabinet cutout that is level, will hold weight
up to 104lbs. (47kg), and is in an area suitable for its size and use.