Filter
Top Products
- 6 -
7. Turn the temperature regulator 8 back to hea-
ting level 1 to keep liquid foods warm. Turn the
temperature regulator 8 to heating level 2 for
keeping solid foods warm. Occasionally stir so-
lid foods while they are being kept warm and
mix a small amount of water into them to avoid a
possible spoiling or burning of the food.
Cleaning and care
Important!
First of all, ALWAYS remove the power cable 5
from the wall socket before cleaning the Electrical
Wok and its components! Otherwise, there is the
great risk of receiving an electric shock!
Important!
NEVER submerge the thermo-plinth 7 in water to
clean it! The appliance could become irreparably
damaged!
After using the Electrical Wok always wait until the
thermo-plinth 7 and the Wok 3 have cooled
down completely!
The risk of burns is ever present!
When you have removed the power cable 5 of the
Electrical Wok from the wall socket, and the Wok 3
and the thermo-plinth 7 have cooled down …
1. Using the wooden spoon w, remove the largest
pieces of food remnants from the Wok 3.
2. Wash the Wok 3 thoroughly in warm water
with a mild washing-up detergent. Do not use
any abrasive cleaners or scouring pads, these
will destroy the non-stick surfaces of the Wok 3
and impair their effectiveness!
3. Clean the housing of the themo-plinth 7 with a
moist sponge.
Storage
• Remove the power cable 5 from both the wall
socket and the thermo-plinth 7 when the app-
liance is not being used.
• Allow the Wok and its components to cool down
completely before storing them away.
• For the sake of safety, ALWAYS store the Electrical
Wok out of the reach of children.
Troubleshooting
Should the Electrical Wok not function or not function
correctly …
1. Check to ensure that the power cable 5 is cor-
rectly connected to the thermo-plinth 7.
2. Check to ensure that the power cable 5 is cor-
rectly connected to the wall socket.
3. Check to ensure that the wall power socket to
which the Electrical Wok is connected is "live",
do this by connecting another appliance to it.
If the malfunction cannot be traced back to one of
these causes …
4. Remove the power cable from the wall socket
and allow the thermo-plinth 7 to cool down
completely.
5. Re-insert the power cable 5 into a wall power
socket.
Should the malfunction not be corrected by the
measures described above, please make contact
with one of our service-partners in your locality.
IB_KH1099_E3477_LB6 10.04.2008 10:29 Uhr Seite 6