Filter
Top Products
17
OPERATING INSTRUCTIONS
English
ADDING RINSE AID TO THE DISPENSER
The use of rinse aid products is recommended
to prevent spots on dishes from water droplets
remaining after the completion of the wash
cycle, and to enhance the performance of the
dry cycle.
NOTE: Only use liquid rinse aid in this
dishwasher.
1
Rotate the round cap counterclockwise to
remove it.
2
Add a liquid rinse aid to the maximum fill
level (max. 4.8 oz [145 ml]).
3
Replace the cap and turn clockwise to lock.
Rinse aid will be automatically dispensed
during the final rinse cycle.
RINSE AID DISPENSER ADJUSTMENT
The rinse aid dispenser is factory set to level 3,
which should provide
the best performance
under most conditions.
Setting the rinse aid
control too low will
contribute to spotting
and streaking of
dishes and poor
drying performance.
Setting the control too high can cause foaming,
which will cause poor wash performance.
To adjust the rinse aid dispenser setting, remove
the cap and adjust the rinse aid lever to the
desired setting.
REFILLING THE RINSE AID
The capacity of the rinse aid dispenser is 4.8 oz
(145 ml). How often the dispenser will need to
be refilled depends on how often dishes are
washed and the rinse aid setting used.
If the rinse aid level is low, an indicator will light.
The indicator light will stay on when the door is
closed to start a cycle.
Rinse-Aid Indicator
Adjustment Lever
78045 LG Dshwshr OM ENSPv08.qxd 4/2/08 10:28 PM Page 17