Manitowoc Ice SN12 Ice Maker User Manual


  Open as PDF
of 2
 
Manitowoc SN12/SN20 Model Nugget Ice Machines
Cutter Head Replacement Instructions
1. Disconnect water supply.
2. Remove front panel.
3. Move toggle switch to CLEAN position after the 5 minute delay expires. The evaporator and float
chamber will drain.
4. Disconnect power at electrical disconnect.
5. Remove top, left and right side panels.
6. Remove ice chute assembly.
NOTE; if the ice wiper can not be hand removed; place the handle end of a screwdriver against the ice
wiper, then tap the screwdriver (counterclockwise) with a hammer to loosen the ice wiper from the
auger.
WARNING
Disconnect power to the ice machine at the electrical disconnect, moving
the toggle switch to the off position will not disconnect line voltage.
Manitowoc Foodservice
2110 South 26
th
Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 000004021
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Sheet 1 of 2
Web Site - www.manitowocice.com
08/25/08
REMOVE ICE DAMPER
REMOVE COVER
REMOVE STRAINER
REMOVE ICE WIPER
LOOSEN HOSE CLAMP AND
DISCONNECT DRAIN LINE
REMOVE ICE CHUTE