Filter
Top Products
STARTING THE SPECIAL TIPS
DISHWASHER • Use HOT Water
After loading the dishwasher and adding detergent, set Hot water dissolves and activates the detergent,
the control knob to tile desired cycle and press tile dissolves grease from tile load and improves dD4ng
appropriate option button(s), results, ttefer to page 6 tbr more information.
• Use Proper Detergent Amount
NOTE: Water heating and dry"options can be used For best soil remowfl, good &ying results and pre-
separately or together, vention of filming, etching and spotting, the proper
amount of detergent nmst be used. Befer to page ,5
Next, rnn the water from the Bet water tap to clear the
for recommended amounts.
line of cold water before starting. Connect select con-
vertible models to the lancet. See page 6. • Use a Rinse Aid
Regnlar use of a rinse aid improves dLying results
Then, press the door nntil it latches. The cycle will and reduces spotting and filming. See page 5 for
begin with a drain prior to fill. nlore information.
Indicator Light • Load the Dishwasher Properly
DELAY START (select models) glows when this To ensure soiled surf'aces get adequate wash action,
option is selected. The light stays on until the start of carefnlly fbllow the loading instructions on pages
the cycle. 2-4.
N HEATING DELAY glows to indicate that the cycle • Select the Proper Cycle
is being extended to heat the water to proper tempera- The cycle selection depends on the amount of food
ture. The light corresponds to the 11!symbol around the soil on the load. See page 7 for cycle descriptions.
controlknob. • Select Fan Dry Heat
Adding a Forgotten Item For improved drying select FAN DR5'-HEAT.
For best cleaning, the forgotten item should be added
early in the cyele.
1. Unlatch the door.
2. Wait for tl_e water circulation to stop.
3. Open the door and add the item.
4. Close and latch the door.
5. The cycle resumes automatically.
Page 8