Filter
Top Products
Controls at a Glance (continued)...................
CONTROL LOCK Pad Example of timer set for five minutes:
The control touch pads can be locked to prevent unwanted
use. They will not function when locked.
If an oven function is currently being used, the controls
• The timer will start automatically after four seco]
cannot be locked.
A flashing colon indicates that the timer is in usl
The current time of day will remain in the display when this during another function's operation.
feature is activated,
• The last minute of the countdown will be displaye
Setting Control Lock: seconds.
1. Press and hold the CONTROL LOCK pad for several 3. Attheendofthetimeset, one long beep will sound.
seconds. The control will beep once indicating it is locked, change the number of timer reminder beeps, see bek,
• OFF will appear in the display for 15 seconds if any pad To cancel: Press and hold the TIMER pad for sew
is pressed, seconds. The time of day will reappear in the displ:
To Cancel; Press and hold the CONTROL LOCK pad for
several seconds. The indicator word OFF will disappear in
Control
the display. puons
Timer Beep Option
Setting the CLOCK you have a choice of three "end of timer" remim
1. Press CLOCK pad. signals.
2. Press or press and hold _ or _ pad until the correct Option 1. One beep at the end of the timer operation, th_
one beep every 30 seconds for the next five minutes
time of day appears in the display, until the CANCEL pad is pressed.
The display will flash when electrical power is first supplied Option 2. One beep at the end of the timer operation, th_
to the oven or if there has been a power failure, one beep every minute for the next 12 hours or until t
To recall the time of day when another function is displayed, CANCEL pad is pressed.
press the CLOCK pad. Option 3. (default option) One beep at the end of the tin
Clock time cannot be changed when the oven has been operation, then, no other beeps.
programmed for clock controlled cooking, self-clean or
delayed self-clean. Setting the Timer Beeps
1. Press the TIMER and CANCEL pads at the same tin
Setting the TIMER and hold for several seconds.
• A single beep will sound.
The timer can be set from one minute (0HR:01) up to 99 hours
and 59 minutes (99:59). • Display will show current option - 1, 2 or 3.
The timer can be used independently of any other oven 2. Pressthe_-X_or_padtoselecttheoptionnumbery(
activity and it can be set while another oven function is wish. The current time of day will reappear in tl
operating. THE TIMER DOES NOT CONTROL THE display after four seconds.
OVEN.
1. Press the TIMER pad.
The indicator word TIMER will flash.
2. Press or press and hold the _ or iCv-@aduntil the correct
time appears in the display.
5