Filter
Top Products
Secure Dishwasher in Cabinet Opening
1
Double check dishwasher
alignment in cabinet opening
Open dishwasher door, remove lower dish rack, and
place towel over pump assembly and lower spray arm of
dishwasher. This will prohibit screws from falling into
pump area when securing dishwasher to countertop.
Check that dishwasher is still level front to back and side
to side in cabinet opening.
IMPORTANT: If you have solid countertops such as
corrian, granite, etc., you must use side mounting kit
(Part Number 8212560). Follow kit instructions. (Brackets
are included with kit.)
Remove lower dish rack
and place towel
2
NOTE: Do not drop screws into bottom of dishwasher.
Locate brackets on top of dishwasher and secure
dishwasher to countertop with two, #10 x 1/2" Phillips-
head screws (included). The dishwasher must be secured
to keep it from shifting when door is opened.
Secure dishwasher
3
Check that top of door does not contact screws,
brackets, or countertop. If it does, adjust leveling legs.
4
Check door clearance
5
Check inner spacing
Open door and check that space between dishwasher
cabinet opening and tub is equal on both sides. If
spacing is not equal, loosen bracket screws secured
and shift tub. Tighten bracket screws.
19
plastic
button
6
Check side attachment
If securing with a side attachment, check that sides of door
do not rub against the screw heads. If they do, dishwasher
must be re-centered. When dishwasher is properly centered,
replace plastic buttons.