Maytag W10345638A Double Oven User Manual


 
20
Prepare Cooktop:
Remove plastic items from the cooktop because they may
melt.
NOTE: The cooktop warming center will not function during the
self-clean cycle.
IMPORTANT:
Oven temperature must be below 400°F (205°C) to program a
clean cycle.
Only 1 oven can be cleaned at a time.
Both oven doors lock when either oven is being cleaned.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil
to a powdery ash.
The oven is preset for a 3 hour clean cycle; however, the time can
be changed. Suggested clean times are 2 hours for light soil and
between 3 hours and 4 hours for average to heavy soil.
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp
cloth to the inner door glass before it has completely cooled.
The oven light will not work during the Self-Cleaning cycle.
On some models, the surface elements will not work during the
Self-Cleaning cycle.
When “LOCK” shows in the display, the door cannot be opened.
To avoid damage to the door, do not force the door open when
“LOCK” is displayed.
If an oven door is left open, “Door Open? Clean Canceled” will
appear in the display and a signal will beep. Close the oven door
and press SELF CLEAN.
NOTE: Only one oven can use the Self-Clean cycle at a time, and
24 hours must pass before the next Self-Clean can begin.
To Self-Clean:
1. Close the oven door.
2. Press SELF CLEAN.
“PRESS (+) FOR UPPER OVEN” will appear in the upper oven
text area, and “PRESS (-) FOR LOWER OVEN” will appear in
the lower oven text area
3. Press the Temp/Time “+” or “-” pads to select the desired
oven.
“REMOVE RACKS” will scroll in the selected oven text area
followed by “SELECT OPTION.” In the other text area,
“PRESS + or - KEY” will scroll from left to right.
4. Choose the Standard Clean setting by pressing the Temp/
Time “+” or “-” pads until “STANDARD CLEAN” and “PUSH
START” scroll in the displays.
5. Press START.
“Select level” will appear in the display.
6. Press the Temp/Time “+” or “-” pads to adjust the clean level.
7. Press START.
“UNLOCK IN XXX” will scroll in the upper or lower text area
(depending on oven selection). “LOCKING” will scroll until the
door is locked.
After the door is lock, “CLEAN UPPER” or “CLEAN LOWER”
will scroll in the selected oven text area until the clean cycle is
finished.
When the self-clean cycle ends:
“CLN COMPLETE will scroll in the selected oven text area.
“OVEN COOLING” will scroll in the display until the oven
temperature falls below 500°F (260°C).
“UNLOCKING” will be displayed until the oven door unlocks and
the lock icon turns off.
To Delay Start Self-Clean:
1. Press Delay Start.
“PRESS (+) FOR UPPER OVEN” will appear in the upper text
area, and “PRESS (-) FOR LOWER OVEN” will appear in the
lower text area.
2. Press the Temp/Time “+” or “-” pads to select the desired
oven.
“--:--” will be displayed, and “Set starting time. Push START”
will scroll from right to left in the selected oven text area for
2 minutes or until the Temp/Time “+” or “-” pads are pressed
again.
3. Press the Temp/Time “+” or “-” pads until the desired time is
reached.
“Select cooking/cleaning mode” will scroll in the selected
oven text area for 2 minutes or until a cleaning cycle is
selected.
4. Press SELF CLEAN.
“REMOVE RACKS” will scroll in the selected oven text area
for 5 seconds, followed by “SELECT OPTION.” In the other
text area, “PRESS + or - KEY” will scroll from left to right.
5. Press the Temp/Time “+” or “-” pads until “Standard Clean” is
displayed.
“Push START” will scroll in the selected oven text area.
6. Press START.
“Select level” will appear in the display.
7. Press the Temp/Time “+” or “-” pads to select the desired
cleaning level.
8. Press START. The cleaning cycle will begin when the delay
time is reached.
The cleaning cycle will begin.
“UNLOCK IN XXX” will scroll in the upper or lower text area
(depending on oven selection). “LOCKING” will scroll until the
door is locked.
After the door is lock, “CLEAN UPPER” or “CLEAN LOWER”
will scroll in the displays until the clean cycle is finished.
When the self-clean cycle ends:
“CLN COMPLETE will scroll in the selected oven text area.
“OVEN COOLING” will scroll in the display until the oven
temperature falls below 500°F (260°C).
“UNLOCKING” will be displayed until the oven door unlocks and
the lock icon turns off.