Filter
Top Products
41
SECTION 4
MAINTENANCE
E. Cleaning parts that were soaked overnight.
Cleaning takes 2 people. One to clean the oven and one to clean the parts.
You will need:
• Boots
• Rubber Gloves
• Steel brush
• Kote Spray
• Squirt bottle filled with water
• Towels
• Grill pads
• Black pad
• Putty knife
NOTE: Before cleaning parts from soak bin cover any dishes or other equipment or pans in the dish area with plastic
sheets. Prepare an area for spraying parts with Kote.
1. Clean windows first.
2. Scrub crumb pans, end plugs, drip pans and blank plates. Then run them through the dish machine, dry thoroughly
and then spray with Kote.
3. Clean conveyor by unfolding carefully on dish sink counter. Rinse away any loose material from conveyor chain and
if needed scrub with small steel brush. Dry the conveyor thoroughly and spray with Kote.
Figure 4-15.
Windows (Blank plates
placed under windows)
Drip
Pans
4. Place the drip pans from both
ovens on top of the fingers, then the
blank plates and last place the win-
dows on the drip pans so they will
not be damaged. Refer to Figure 4-
15.
5. Allow to soak overnight.