Filter
Top Products
Before using for the first time
^
Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1
1/2
and 2 hour after
transporting it to its final location
before connecting it to the mains.
Switching on
The refrigerator and freezer sections
are switched on together by pressing
the master switch on the right hand
side of the control panel.
^ Press the master switch.
The refrigerator section temperature
display lights up.
Bars light up in the freezer section
temperature display.
The appliance starts cooling.
You can also switch the whole
appliance on by pressing the On/Off
button for the refrigerator section on the
left hand side of the control panel.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Cool pack
Place the cool pack in the top freezer
drawer or to save space on the freezer
tray. The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Switching off
^
Press the master switch on the right
hand side of the control panel.
The temperature display goes out and
the cooling process is switched off. If
this does not happen, then the safety
lock has been activated.
To switch the refrigerator section off
separately
The refrigerator section can be
switched off without having to switch off
the freezer section. This is useful e.g.
whilst on holiday.
^
Press the On/Off button for the
refrigerator section on the left hand
side of the control panel.
The refrigerator section temperature
display goes out and the refrigerator
section switches off.
Switching on and off
14