Do not let water get into the
electronic unit or into the light.
Do not let water get into the
condensate channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is required
in the event of a service call.
To avoid damaging the surfaces of
your appliance, do not use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
–
cleaning agents containing
descaling agents,
–
abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
–
solvent-based cleaning agents,
–
stainless steel cleaning agents,
–
dishwasher cleaner,
–
oven sprays,
–
glass cleaning agents,
–
hard, abrasive sponges and
brushes, e.g. pot scourers,
–
melamine eraser blocks,
–
sharp metal scrapers.
Before cleaning
^
Switch off the appliance.
The display will go out and the
cooling system will switch off.
If this does not happen the lock is
active (see "Selecting settings - To
deactivate the lock").
^
Disconnect the appliance from the
mains electricity supply.
^
Take any food out of the appliance
and store it in a cool place.
^ Remove all shelves from the
appliance door.
^ Remove the compartments and the
compartment lid from the
PerfectFresh zone (see "Adjusting the
interior fittings - PerfectFresh zone
compartments")
^ Take the glass plate out of the
dividing plate.
^
Pull the dividing plate out with both
hands.
^
Take out all other removable parts for
cleaning.
Cleaning and care
35