Filter
Top Products
^ Carefully remove the protective foil
from sealing strip m.
^ Fix sealing strip m flush with the front
of the appliance on the door opening
side.
1. Position the sealing strip flush with
the lower edge of the top fixing.
2. Stick it down along its entire
length.
Building in the appliance
^
Push the appliance into the niche
until the fixing brackets at all four
corners are in line with the front edge
of the furniture side wall.
–
n With 16 mm thick walls:
The spacers should touch the front
edge at the top and bottom of the
side walls of the housing unit.
–
o With 19 mm thick walls:
The front edges of the top and
bottom hinges should be flush with
the front edge of the housing side
walls.
Building in the appliance
61