Filter
Top Products
^
Tighten all screws again.
^ Replace top cover o, and click it into
place.
^
Replace side covers p, making sure
you hear them click into place.
To make sure the appliance is
correctly fitted:
–
The doors must close properly.
–
The doors must not touch the
housing unit.
–
The seal at the top edge of the
handle side must fit properly.
^
To double check place a torch in the
appliance and close the door.
Turn the lights out in the room. If you
can see any light shining out from the
sides double check the installation.
Building in the appliance
70