Drip tray and waste container
Clean the drip tray and waste
container every day every day to
avoid unpleasant smells and
mildew.
The waste container is located in the
drip tray. Water from rinsing also
collects in the waste container.
A prompt will appear in the coffee
system display when the drip tray
and/or the waste container is full and
needs to be emptied. Empty the drip
tray and the waste container.
Danger of burns.
If the rinsing process has just
finished, wait a while before
removing the drip tray as the water
used for rinsing will run out of the
coffee spouts.
^
Push the main dispenser up as far as
it will go.
^
Then pull the drip tray carefully out of
the machine. Take the lid off a.
^ Empty the drip tray and waste
container.
^ Remove the drip tray cover b and
the holder c for the drip tray.
^ Clean all parts thoroughly.
Clean the drip tray holder by hand
only using warm water and liquid
dish soap. All other parts are
dishwasher-safe.
^
Clean the space under the drip tray.
^
Reassemble all parts and place the
drip tray back in the coffee system.
Make sure the drip tray has been
pushed into its niche as far as it will
go.
Cleaning and care
50
a
b
c